primer orifice round count
Quote from Reloader on July 22, 2015, 3:12 amloaded about 1200 rounds, then started having primer issues. Red tip appeared OK but would not come out of tube with ease, slightly deformed. After replacing with a new red tip all functions as normal. Cup is at 1.407 with in the .003 specs of 1.41 +/- .003.
What other issues should I look for? Is there an expected round count per orifice? Are there other issues might I need to investigate?
loaded about 1200 rounds, then started having primer issues. Red tip appeared OK but would not come out of tube with ease, slightly deformed. After replacing with a new red tip all functions as normal. Cup is at 1.407 with in the .003 specs of 1.41 +/- .003.
What other issues should I look for? Is there an expected round count per orifice? Are there other issues might I need to investigate?
Quote from Reloader on July 22, 2015, 6:58 pmThis deformation can easily be caused by out-of-round primers. No typical lifespan on the tips. I've had some last 100K rounds, others last less than 100. As you use them up, contact us for a couple of warranty replacement tips as needed.
This deformation can easily be caused by out-of-round primers. No typical lifespan on the tips. I've had some last 100K rounds, others last less than 100. As you use them up, contact us for a couple of warranty replacement tips as needed.