Primer Seating

#1 · December 7, 2014, 6:46 pm

I am setting up my square deal reloader and I am having problems with the primers seating in completely. They seem to be only going in about 1/2 way. Is there an adjustment I don't see ?

#2 · December 8, 2014, 3:21 am

Make sure the shell plate is not lose. There is a good figure of the SDB Primer Slide Adjustment on page 4 of the owners manual. The primer slide has a Primer Punch Set Screw (part number 13823). Shows the spec value of distance between top of primer cup to bottom of primer slide of 1.410 inch plus/minus 0.03.