primer system assembly assem/disassembly instructions needed. needed
Quote from Reloader on September 19, 2019, 3:49 amAfter having multiple primer explosion and getting a new primer system assembly from Dillon Aust, I have found that the primer indexing arm was not holding the 9 mm cases in properly, my question is how can you adjust this and is there any instruction sheets on assembly/disassembly and adjustment of the primer system assembly.
Because the primer indexing arm is not against 9 mm cases the primer does not center well and gets bent out of shape hence needing the instructions to dismantle and assemble correctly.
I did get an alignment tool and used that first off to make sure everything was lined up correctly.
Any help would be much appreciated
After having multiple primer explosion and getting a new primer system assembly from Dillon Aust, I have found that the primer indexing arm was not holding the 9 mm cases in properly, my question is how can you adjust this and is there any instruction sheets on assembly/disassembly and adjustment of the primer system assembly.
Because the primer indexing arm is not against 9 mm cases the primer does not center well and gets bent out of shape hence needing the instructions to dismantle and assemble correctly.
I did get an alignment tool and used that first off to make sure everything was lined up correctly.
Any help would be much appreciated