Primer Tube
Quote from Reloader on November 5, 2010, 2:25 amHave a CCI 500 primer stuck in the pickup tube. Tried gently persuading it with the follower rod and then with a wooden dowel. I'm not pressing my luck.
Read in other posts w/ similar problems to spray inside the tube w/ WD40, bend the tube and toss. Will you guys replace it under warranty? If had the SDB less than a month.
Thanks.
Have a CCI 500 primer stuck in the pickup tube. Tried gently persuading it with the follower rod and then with a wooden dowel. I'm not pressing my luck.
Read in other posts w/ similar problems to spray inside the tube w/ WD40, bend the tube and toss. Will you guys replace it under warranty? If had the SDB less than a month.
Thanks.
Quote from Reloader on November 5, 2010, 4:13 amIf you aren't comfortable working with a stuck primer, definitely don't mess with it. Call Dillon in the morning and they will send you a new tube.
I can't remember if it is in the SDB manual, but, in the XL650 manual it says do to exactly as you describe.
You might want to pick up a spare, too, if you don't have one.
Bob
If you aren't comfortable working with a stuck primer, definitely don't mess with it. Call Dillon in the morning and they will send you a new tube.
I can't remember if it is in the SDB manual, but, in the XL650 manual it says do to exactly as you describe.
You might want to pick up a spare, too, if you don't have one.
Bob
Quote from Reloader on November 5, 2010, 2:31 pmThanks. They're sending a new one out today. FYI: While speaking with Dillon, they did not recommend my use of a dowel. Nothing more than the follower rod. Please don't try this at home.
Thanks. They're sending a new one out today. FYI: While speaking with Dillon, they did not recommend my use of a dowel. Nothing more than the follower rod. Please don't try this at home.