primers
Quote from Reloader on November 1, 2017, 5:16 pmI have had major issues with my machine as well. I finally got so sick of the issue that I made a collar out of a sliver of a 3/8" socket for part 13793 to be able to get my machine to work. It still works but this travel bar if the weak link here. This machine has some serious design flaws wrapped around the primer feed and these specific parts. I wish I could post a picture here.
Could anyone advise me if they have chamfered the drop tube at the top to help with feeding issues?
I have had major issues with my machine as well. I finally got so sick of the issue that I made a collar out of a sliver of a 3/8" socket for part 13793 to be able to get my machine to work. It still works but this travel bar if the weak link here. This machine has some serious design flaws wrapped around the primer feed and these specific parts. I wish I could post a picture here.
Could anyone advise me if they have chamfered the drop tube at the top to help with feeding issues?
Quote from Reloader on December 31, 2017, 2:08 amGo check out the videos done by Powerfactor show on the SL900 and how to fix the primer feed system.
Go check out the videos done by Powerfactor show on the SL900 and how to fix the primer feed system.
Quote from Reloader on October 16, 2018, 8:38 pmThe collar around 14808 helped (I can adjust moore). Still I do not understand :
why does arm 16691 starts swinging back before conttact between 17639 and 17132 opens ? Machine would have moore time to drop the primer.
My opinion : Desin is not wery clewer here.
Dillon please chainge it !
The collar around 14808 helped (I can adjust moore). Still I do not understand :
why does arm 16691 starts swinging back before conttact between 17639 and 17132 opens ? Machine would have moore time to drop the primer.
My opinion : Desin is not wery clewer here.
Dillon please chainge it !