Primers not dropping into cup

#1 · May 7, 2020, 3:27 pm

I’ve had my 750 for a few weeks and this issue just started today. Primers are not dropping into the cup without applying some pressure to the primer follower rod. I taped a 200gr bullet to the rod to apply some pressure to the primer stack and that seemed to fix the issue until you get down to the last 25 or 30 primers. For the last 25-30 primers you have to apply light pressure to the primer follower rod by hand to get each primer to feed into the cup

What adjustments do I need to make?

#2 · May 7, 2020, 5:07 pm

Same issue I have here https://www.dillonprecision.com/primer-pick-up-issue_350_32_4403.htm.

Haven't had a chance to make the adjustments yet.

#3 · May 20, 2020, 1:16 pm

That worked great. Thanks for the help!

#4 · June 14, 2020, 1:22 pm

I’m having same problem with my 650 and looking for solution.

#5 · July 6, 2020, 7:37 pm

To the original poster. I’m having the same issue. Did you get it resolved? If so, what was the solution?
Thank you,
Glenn