Reloading 223/5.56
Quote from Reloader on January 9, 2015, 3:59 amI'm considering purchasing 223 dies from Dillon directly. Are they currently backordered or are they in good supply.
Second, I am reloading for an AR 15. I've read that there could be issues with CCI primers feeding. I suspect that's because they were using crimped brass or a light hammer spring. I will be swaging my casings so I don't think that this would be a problem.
I'm considering purchasing 223 dies from Dillon directly. Are they currently backordered or are they in good supply.
Second, I am reloading for an AR 15. I've read that there could be issues with CCI primers feeding. I suspect that's because they were using crimped brass or a light hammer spring. I will be swaging my casings so I don't think that this would be a problem.
Quote from Reloader on February 24, 2016, 1:52 pmDitto; "Well worth the wait". The Carbide 5.56/223 size die feels like your bushing soft butter into it. If your running 100's or 1000's of rounds, it;s worth every penny.
Ditto; "Well worth the wait". The Carbide 5.56/223 size die feels like your bushing soft butter into it. If your running 100's or 1000's of rounds, it;s worth every penny.