Quote from
Reloader on December 9, 2014, 7:13 pm
It is normal to see where the bullet stops going into the case when seated.If the dies are set up correctly, this should be all the way around the case, not just on one side. If this only appears on one side, then loosen the lock rings, and run cases up into all dies. With the cases up in the dies, tighten the lock rings.
It is normal to see where the bullet stops going into the case when seated.If the dies are set up correctly, this should be all the way around the case, not just on one side. If this only appears on one side, then loosen the lock rings, and run cases up into all dies. With the cases up in the dies, tighten the lock rings.
