RL1100 Case Feed Problem
Quote from Reloader on June 12, 2021, 5:01 pmI am setting up my new RL1100 received last week. When 6.5 Creedmoor brass comes down the feed tube it comes into the shell plate cocked back and jambs. The problem is the shell holder is not being pushed back far enough to allow the case to drop completely and the plate that pushes the mechanism back cannot be adjusted.
I am setting up my new RL1100 received last week. When 6.5 Creedmoor brass comes down the feed tube it comes into the shell plate cocked back and jambs. The problem is the shell holder is not being pushed back far enough to allow the case to drop completely and the plate that pushes the mechanism back cannot be adjusted.
Quote from Reloader on June 12, 2021, 6:34 pmDo you have the correct "casefeed adapter" bushing installed from your conversion kit? https://vimeo.com/541860512#t=39s
Do you have the correct "casefeed adapter" bushing installed from your conversion kit? https://vimeo.com/541860512#t=39s
Quote from Reloader on June 12, 2021, 7:10 pmThanks and that video fixed my issue. I am new to the progressive press reloading and the instructions did not say to put the bushing on the roller pin. Doha! I am learning by trial and mostly error.
Thanks and that video fixed my issue. I am new to the progressive press reloading and the instructions did not say to put the bushing on the roller pin. Doha! I am learning by trial and mostly error.