Rust Prevention
Quote from Reloader on June 7, 2009, 6:26 pmI am getting rust on the powder funnel. (I live in FL and the high humidity does not help) The lower outer part gets cleaned with the first couple of brass that go thru. I would like to receive any recommendations to prevent or eliminate this rust. Also any advice if I should clean the funnel with steel wool before beginning each reloading session.
I am getting rust on the powder funnel. (I live in FL and the high humidity does not help) The lower outer part gets cleaned with the first couple of brass that go thru. I would like to receive any recommendations to prevent or eliminate this rust. Also any advice if I should clean the funnel with steel wool before beginning each reloading session.
Quote from Reloader on June 10, 2009, 4:48 pmIt is recommended to use a water barrier such as paste car wax, or some of the various aerosol rust preventatives on the steel parts. On the powder funnel, this material would need to be removed prior to reloading.
It is recommended to use a water barrier such as paste car wax, or some of the various aerosol rust preventatives on the steel parts. On the powder funnel, this material would need to be removed prior to reloading.