SDB Primer P/U
Quote from Reloader on June 3, 2010, 2:18 amHi, just picked up a SDB 9mm, although i have searched many of the q/a already, i couldn't find the answer to my problem, i have everything set up, however i have been having a problem w/ my primer p/u, took it apart, checked, cleaned and reass. about 6 times, everything is going so far except the pick up, the tube is loaded and i am using small primers w/ the blue magizine, my primer arm comes back but no primer is getting loaded, however when i manually grab the white slider and pull back about another 1/4" the primer falls into the pocket, i have tried to screw the screw all the way out, 1/2 way just about all combo's, is my spring too tight, it is a new loader? not sure what else to do and i don't want to keep doing it man. thanks in advance!
Hi, just picked up a SDB 9mm, although i have searched many of the q/a already, i couldn't find the answer to my problem, i have everything set up, however i have been having a problem w/ my primer p/u, took it apart, checked, cleaned and reass. about 6 times, everything is going so far except the pick up, the tube is loaded and i am using small primers w/ the blue magizine, my primer arm comes back but no primer is getting loaded, however when i manually grab the white slider and pull back about another 1/4" the primer falls into the pocket, i have tried to screw the screw all the way out, 1/2 way just about all combo's, is my spring too tight, it is a new loader? not sure what else to do and i don't want to keep doing it man. thanks in advance!
Quote from Reloader on June 3, 2010, 8:36 pmHi. There could be a problem with the height of the primer cup. On a new machine, check page 4 of the instruction manual to verify the height of the cup. If that is in spec, please call us and we will fix this over the phone.
thanks
Hi. There could be a problem with the height of the primer cup. On a new machine, check page 4 of the instruction manual to verify the height of the cup. If that is in spec, please call us and we will fix this over the phone.
thanks
Quote from Reloader on June 5, 2010, 7:43 pmok thanks i found it out called and spoke w/ tim, very helpful thanks again, customer for life ryan
ok thanks i found it out called and spoke w/ tim, very helpful thanks again, customer for life ryan