SDB Tool Head
Quote from Reloader on July 19, 2013, 12:44 amI would like to second the request for Dillon to offer a SDB Tool Head Stand? What can be so different than using the basic layout of the other stand and modify the part that does not fit? I cannot believe that with all of the SDB's and coversion kits sold that you dont offer one.
LeftyTSGC
I would like to second the request for Dillon to offer a SDB Tool Head Stand? What can be so different than using the basic layout of the other stand and modify the part that does not fit? I cannot believe that with all of the SDB's and coversion kits sold that you dont offer one.
LeftyTSGC
Quote from Reloader on July 24, 2013, 7:21 pmdesign one like I did. I used a piece of 1x4 wood as a proto type and drilled appropriate size holes to accommodate bullet seater, sizer ect. then I drilled a 1/8 in. hole through the block for the decapping pin, in the same hole I drilled a 1/4 in. hole part way down to hold the decapping pin nut. Right next to that I drilled part way so the powder funnel holder will set in even with the other. I placed the shell plate on wood and drilled 4 more holes in middle of where brass goes and put shell holders in them to hold shell plate. drill extra holes as needed for extra bullet seaters. works great! now as soon as I get some 1x4 aluminum I'll do the same and paint them blue. I wish I knew how to post pictures on here, if I did I could show you.
design one like I did. I used a piece of 1x4 wood as a proto type and drilled appropriate size holes to accommodate bullet seater, sizer ect. then I drilled a 1/8 in. hole through the block for the decapping pin, in the same hole I drilled a 1/4 in. hole part way down to hold the decapping pin nut. Right next to that I drilled part way so the powder funnel holder will set in even with the other. I placed the shell plate on wood and drilled 4 more holes in middle of where brass goes and put shell holders in them to hold shell plate. drill extra holes as needed for extra bullet seaters. works great! now as soon as I get some 1x4 aluminum I'll do the same and paint them blue. I wish I knew how to post pictures on here, if I did I could show you.
Quote from Reloader on August 30, 2013, 7:32 pmFinally got some 1x4 aluminum and made tool head stands. they work like a dream!! Cannot post pictures or else I would show how they were made. Anyone interested on how its made just let me know.
Finally got some 1x4 aluminum and made tool head stands. they work like a dream!! Cannot post pictures or else I would show how they were made. Anyone interested on how its made just let me know.
Quote from Reloader on November 22, 2013, 10:54 pmLarr,
Can i send you my email and ask you to send me pictures and instructions. Or provide me with contact informaiton so i can send you one.
thanks,
Lefty
Larr,
Can i send you my email and ask you to send me pictures and instructions. Or provide me with contact informaiton so i can send you one.
thanks,
Lefty
Quote from Reloader on November 28, 2013, 4:26 pmSure lefty, I'll send you a link to my pics. you should be able to get an idea how they are made.
Sure lefty, I'll send you a link to my pics. you should be able to get an idea how they are made.