Shell Plate Not Indexing Properly
Quote from Reloader on January 2, 2021, 12:57 pmI have a Square deal, 550, 650 and a new 750.
I am not happy with the new 750 press.
I am having issues with the shell plate not completely
indexing causing the primer seating upstroke to intermittently fail.
Failures include flipped primers and crushed primers.
The shell plate hangs up just short of indexing causing the primer cup to
snap up into the shell plate causing the problems.
I removed the shell plate several time to clean under it.
Tried loosening the plate screw.
Never had a problem like this on any press before.
I have a Square deal, 550, 650 and a new 750.
I am not happy with the new 750 press.
I am having issues with the shell plate not completely
indexing causing the primer seating upstroke to intermittently fail.
Failures include flipped primers and crushed primers.
The shell plate hangs up just short of indexing causing the primer cup to
snap up into the shell plate causing the problems.
I removed the shell plate several time to clean under it.
Tried loosening the plate screw.
Never had a problem like this on any press before.
Quote from Reloader on January 11, 2021, 7:11 pmI had the same problem with my XL750.
On the left side of the press under position #4 there are 2 Allen head cap screws. Loosen those and move the block forward or aft. I took a bright LED and a magnifying glass to rotate mine correctly.
You can tell that you are on the correct block by the angled black plastic piece that actually rotates the shell plate which direction the adjustment block needs to go in.
Once it's adjusted you won't have anymore problems.
I had the same problem with my XL750.
On the left side of the press under position #4 there are 2 Allen head cap screws. Loosen those and move the block forward or aft. I took a bright LED and a magnifying glass to rotate mine correctly.
You can tell that you are on the correct block by the angled black plastic piece that actually rotates the shell plate which direction the adjustment block needs to go in.
Once it's adjusted you won't have anymore problems.
Quote from Reloader on January 24, 2021, 6:56 pmI had a similar problem. Mine was caused by over tightening the shell plate bolt. I backed it out 1/8 - 1/4 turn and the problem stopped.
I had a similar problem. Mine was caused by over tightening the shell plate bolt. I backed it out 1/8 - 1/4 turn and the problem stopped.
Quote from tajogej112 on September 10, 2026, 7:26 amCharacters perform humanly impossible feats like gracefully sliding out of a car in movement or hitting an incoming rocket with a revolver. IndoCair Alternatif
Characters perform humanly impossible feats like gracefully sliding out of a car in movement or hitting an incoming rocket with a revolver. IndoCair Alternatif
Quote from daniyal on September 27, 2026, 2:59 pmIts like you read my mind! You appear to know a lot about this, like you wrote the book in it or something. I think that you could do with a few pics to drive the message home a bit, but other than that, this is fantastic blog. A great read. Iโll certainly be back. ๊ฐ๋จํ์ธ๋กฑ
Its like you read my mind! You appear to know a lot about this, like you wrote the book in it or something. I think that you could do with a few pics to drive the message home a bit, but other than that, this is fantastic blog. A great read. Iโll certainly be back. ๊ฐ๋จํ์ธ๋กฑ
Quote from tajogej112 on September 29, 2026, 8:22 amYour talent is really appreciated!! Thank you. You saved me a lot of frustration. I switched from Joomla to Drupal to the WordPress platform and Ive fully embraced WordPress. Its so much easier and easier to tweak. Anyway, thanks again. Awesome domain! เธเธนเธซเธเธฑเธเนเธญเนเธเธเน.live
Your talent is really appreciated!! Thank you. You saved me a lot of frustration. I switched from Joomla to Drupal to the WordPress platform and Ive fully embraced WordPress. Its so much easier and easier to tweak. Anyway, thanks again. Awesome domain! เธเธนเธซเธเธฑเธเนเธญเนเธเธเน.live
Quote from tajogej112 on October 10, 2026, 8:54 am์์ฅ ๋ณํ๋ฅผ ๋ฐ๋ผ๋ณผ ๋ ํ์ํ ๊ธฐ์ค๊ณผ ์๋นํธ๋ผ ์์ธ ํ์ธ ํฌ์ธํธ๋ฅผ ์งง๊ฒ ์ ๋ฆฌํ์ต๋๋ค ํ์ํ ๋ถ๋ถ๋ง ์งง๊ฒ ๋ด์์ต๋๋ค ์๋นํธ๋ผ ์์ธ
์์ฅ ๋ณํ๋ฅผ ๋ฐ๋ผ๋ณผ ๋ ํ์ํ ๊ธฐ์ค๊ณผ ์๋นํธ๋ผ ์์ธ ํ์ธ ํฌ์ธํธ๋ฅผ ์งง๊ฒ ์ ๋ฆฌํ์ต๋๋ค ํ์ํ ๋ถ๋ถ๋ง ์งง๊ฒ ๋ด์์ต๋๋ค ์๋นํธ๋ผ ์์ธ
Quote from aazzazaa on October 12, 2026, 6:37 am๋ฐฉ๋ฌธ ์ฅ์๊ถ, ํ์ ๋ฐฉ์, ์ง์ฐ ๋ณ์, ํ์ธ ๊ธฐ์ค ๊ธฐ์ค์ ๋น๊ตํ๋ฉฐ ๋ฌ์์ ์ถ์ฅ ์ด์ฉ ์ ํ์ํ ํต์ฌ ์กฐ๊ฑด์ ๋ฌธ์ ์ ์ ๋น ๋ฅด๊ฒ ํ์ ํ๋๋ก ์ ๋ฆฌํ์ต๋๋ค ๋ฌ์์ ์ถ์ฅ
๋ฐฉ๋ฌธ ์ฅ์๊ถ, ํ์ ๋ฐฉ์, ์ง์ฐ ๋ณ์, ํ์ธ ๊ธฐ์ค ๊ธฐ์ค์ ๋น๊ตํ๋ฉฐ ๋ฌ์์ ์ถ์ฅ ์ด์ฉ ์ ํ์ํ ํต์ฌ ์กฐ๊ฑด์ ๋ฌธ์ ์ ์ ๋น ๋ฅด๊ฒ ํ์ ํ๋๋ก ์ ๋ฆฌํ์ต๋๋ค ๋ฌ์์ ์ถ์ฅ
Quote from daniyal on October 12, 2026, 2:55 pm์ ์ฃผ ์ ํฅ ์ ๋ณด๋ฅผ ์ฐพ๋ ๋ถ๋ค์ ์ํด ์ง์ญ ๋ถ์๊ธฐ, ๋ชจ์ ์ผ์ , ๋ชฉ์ ๋ณ ์ด์ฉ ๊ด๋ จ ํ๋ฆ์ ๋น๊ตํ๊ณ ์์ฝ ์ ํ์ธํ ๊ธฐ์ค๊ณผ ์ฃผ์์ ๊น์ง ์ฐจ๋ถํ ์ ๋ฆฌํ์ต๋๋ค ์ ์ฃผ ์ ํฅ
์ ์ฃผ ์ ํฅ ์ ๋ณด๋ฅผ ์ฐพ๋ ๋ถ๋ค์ ์ํด ์ง์ญ ๋ถ์๊ธฐ, ๋ชจ์ ์ผ์ , ๋ชฉ์ ๋ณ ์ด์ฉ ๊ด๋ จ ํ๋ฆ์ ๋น๊ตํ๊ณ ์์ฝ ์ ํ์ธํ ๊ธฐ์ค๊ณผ ์ฃผ์์ ๊น์ง ์ฐจ๋ถํ ์ ๋ฆฌํ์ต๋๋ค ์ ์ฃผ ์ ํฅ
Quote from aazzazaa on October 15, 2026, 11:26 am์ฒ์ ํ์ธํ๋ ์ฌ๋๋ ํ๋จํ๊ธฐ ์ฝ๋๋ก ๋ฑ๊ธ ๊ธฐ์ค๊ณผ ์์ฌ๊ฐ, ๋น๊ต ํฌ์ธํธ, ์ต์ ์ฐจ์ด์ ๊ฒ์ ํฌ์ธํธ๋ฅผ ์ฐจ๋ถํ ๋ค๋ฃจ๊ณ ํ์ํ ์ ๋ณด๋ฅผ ์ด์ด์ ์ ๋ฆฌํ ๋ ํ๋ฆฌ์นด ๋ฐฑํฉ ์๋ด์ ๋๋ค ํ์ธ ํฌ์ธํธ๋ ์ค์ ์ ํ ๋จ๊ณ์ ๋ง์ท์ต๋๋ค ๋ฌธ๋งฅ์ ์์ฐ์ค๋ฝ๊ฒ ์ด์ด์ง๋๋ก ๋ณด๊ฐํ์ต๋๋ค ๋ ํ๋ฆฌ์นด ๋ฐฑํฉ
์ฒ์ ํ์ธํ๋ ์ฌ๋๋ ํ๋จํ๊ธฐ ์ฝ๋๋ก ๋ฑ๊ธ ๊ธฐ์ค๊ณผ ์์ฌ๊ฐ, ๋น๊ต ํฌ์ธํธ, ์ต์ ์ฐจ์ด์ ๊ฒ์ ํฌ์ธํธ๋ฅผ ์ฐจ๋ถํ ๋ค๋ฃจ๊ณ ํ์ํ ์ ๋ณด๋ฅผ ์ด์ด์ ์ ๋ฆฌํ ๋ ํ๋ฆฌ์นด ๋ฐฑํฉ ์๋ด์ ๋๋ค ํ์ธ ํฌ์ธํธ๋ ์ค์ ์ ํ ๋จ๊ณ์ ๋ง์ท์ต๋๋ค ๋ฌธ๋งฅ์ ์์ฐ์ค๋ฝ๊ฒ ์ด์ด์ง๋๋ก ๋ณด๊ฐํ์ต๋๋ค ๋ ํ๋ฆฌ์นด ๋ฐฑํฉ
