Shellplate not advancing
Quote from Reloader on September 9, 2013, 1:22 pmWE were loading 40 cal the other day, and rthe shell palte did not advance. When this happens we get two shells at station one and things jam up. Also a double drop of power occurs (We caught that I think). We also get two shells to feed at once sometimes. We had loaded about 50 and things were working fine. Blew out any powder and removed the second case and moved on. Happened twice.
WE were loading 40 cal the other day, and rthe shell palte did not advance. When this happens we get two shells at station one and things jam up. Also a double drop of power occurs (We caught that I think). We also get two shells to feed at once sometimes. We had loaded about 50 and things were working fine. Blew out any powder and removed the second case and moved on. Happened twice.
Quote from Reloader on September 9, 2013, 4:54 pmI strongly suggest you phone us when you are in front of the machine for assistance. Mondays are the busiest day, other weekdays are a shorter wait time.
I strongly suggest you phone us when you are in front of the machine for assistance. Mondays are the busiest day, other weekdays are a shorter wait time.
Quote from Reloader on September 10, 2013, 3:39 pmYou might have a primer stuck under your shell plate. Just remove it and check. This happened to me. Good luck.
You might have a primer stuck under your shell plate. Just remove it and check. This happened to me. Good luck.