small powder bar hangging

#1 · January 17, 2013, 11:19 pm

when i use h110 powder which is very fine with the small powder bar #20062 and the spacer #13644 after 4 or 5 loads i notice it really gets sticky and hangs. after further investigation i noticed grooves in the face's of each bar. yes it is old but my question is are these two parts under any kind of warranty

#2 · January 18, 2013, 3:41 pm

It is a common occurance for very fine ball powders to bind in the small powder bar. Powders such as H110, W296, AA 5,7 &9. Email us your address, we can mail you a thicker spacer bar which might help.

#3 · January 23, 2013, 11:25 pm

thank you rep. for the help