square deal
Quote from Reloader on March 16, 2010, 10:42 amI recently helped a older club member with his brand new press ,a square deal . The press was supposed to be setup at the factory for 32 wadcutter. Nothing was set for this purchaser at all, someone was asleep at the switch. I personally have found dillon representatives always helpful and kind , i own an 550 press for about 20 years give or take ,thousands of rounds built with it ,the primer system acts up now and again but otherwise a great machine .
p.s. the square deal spent primers miss the container and end up on the floor.
this indivdual has had no luck with the phone number and getting tech help that was needed, realize that not everyone is mechcanically inclined .
I recently helped a older club member with his brand new press ,a square deal . The press was supposed to be setup at the factory for 32 wadcutter. Nothing was set for this purchaser at all, someone was asleep at the switch. I personally have found dillon representatives always helpful and kind , i own an 550 press for about 20 years give or take ,thousands of rounds built with it ,the primer system acts up now and again but otherwise a great machine .
p.s. the square deal spent primers miss the container and end up on the floor.
this indivdual has had no luck with the phone number and getting tech help that was needed, realize that not everyone is mechcanically inclined .
Quote from Reloader on March 16, 2010, 1:56 pmWhen Square Deal machines are set up here, they are not dialed in for a specific bullet style or weight. It would have been necessary to change the bullet seating stem and exchange the powder funnel for the 'SW' -marked one in the package. For the best technical support, please have your club member phone us when he can be in front of the machine. Be sure he also ordered the extra-small powder bar for .32 S&W Long wadcutter loading, as the powder charges for this case are usually in the 1.X range.
When Square Deal machines are set up here, they are not dialed in for a specific bullet style or weight. It would have been necessary to change the bullet seating stem and exchange the powder funnel for the 'SW' -marked one in the package. For the best technical support, please have your club member phone us when he can be in front of the machine. Be sure he also ordered the extra-small powder bar for .32 S&W Long wadcutter loading, as the powder charges for this case are usually in the 1.X range.