strange primer tube issue

#1 · December 17, 2015, 12:30 am

I am getting ready to do a caliber change from 5.56 to 7.62. With the primer system off the press and the top cap unscrewed, the small primer tube is stuck in the primer magazine. Is it normally hard to remove or do I have to remove the primer wheel first?

Thanks

#2 · December 17, 2015, 4:50 pm

The magazine is a snug fit, but should slide out. It sounds like a burr on the brass end at the bottom of the tube. You might need to remove the disc and push up on the tube. If you have any damage to the tube, please email us for a replacement. Please include your return address if you email us.