Swapping to large charge Bar
Quote from Reloader on March 31, 2014, 3:00 pmcould someone please post a link to the procedure for switching from the small to the large charging bar?
Thanks .. K
could someone please post a link to the procedure for switching from the small to the large charging bar?
Thanks .. K
Quote from Reloader on March 31, 2014, 4:25 pmFirst, dump all powder out of the measure. Then pull out the white plastic plug from the top of the powder measure body. Now push the spacer bar out. With the spacer bar out, lift the small powder bar up to clear it from the bellcrank cube and withdraw it from the housing.
To insert the large bar, simply slide it in until the face of the bar contacts the bellcrank cube. Use your finger to push the bellcrank and cube outward just enough to allow the bar to push past it. Once the notch in the side of the bar is in line with the cube, align the cube to fit into the notch.
First, dump all powder out of the measure. Then pull out the white plastic plug from the top of the powder measure body. Now push the spacer bar out. With the spacer bar out, lift the small powder bar up to clear it from the bellcrank cube and withdraw it from the housing.
To insert the large bar, simply slide it in until the face of the bar contacts the bellcrank cube. Use your finger to push the bellcrank and cube outward just enough to allow the bar to push past it. Once the notch in the side of the bar is in line with the cube, align the cube to fit into the notch.
Quote from Reloader on April 1, 2014, 7:42 amThanks .. That was the only way I could see to do it .. I thought I was missing something. It came apart so easy since all I had to do was lift the small bar out after removing the spacer. I didn't want to be a ham fisted lout and break something .. Thank you again ..
BTW .. I am going to try the large bar and see if I can use it to solve the bridging problem with Trailboss.
Thanks .. That was the only way I could see to do it .. I thought I was missing something. It came apart so easy since all I had to do was lift the small bar out after removing the spacer. I didn't want to be a ham fisted lout and break something .. Thank you again ..
BTW .. I am going to try the large bar and see if I can use it to solve the bridging problem with Trailboss.