Tool Head Stand for SDB
Quote from Reloader on June 11, 2014, 1:10 amToo bad there isn't an equivalent tool head stand for the Square Deal B like for the XL650 or RL550 machines. It would be a nice thing to have when I'm changing calibers, or adjusting the dies on the machine instead of having to find a place to lean the powder system against the back of the bench and hope it doesn't tip over. I suppose I could make one if I had an old #2 die lying around somewhere I could drill a hole through a piece of 2 X 4 and slip the die into that. Trouble is, I don't have any old #2 dies....
Too bad there isn't an equivalent tool head stand for the Square Deal B like for the XL650 or RL550 machines. It would be a nice thing to have when I'm changing calibers, or adjusting the dies on the machine instead of having to find a place to lean the powder system against the back of the bench and hope it doesn't tip over. I suppose I could make one if I had an old #2 die lying around somewhere I could drill a hole through a piece of 2 X 4 and slip the die into that. Trouble is, I don't have any old #2 dies....
Quote from Reloader on June 11, 2014, 5:39 pmWe expect to have one in the next 6-9 months. Just there are other projects with higher priority to get finished first.
We expect to have one in the next 6-9 months. Just there are other projects with higher priority to get finished first.
Quote from Reloader on June 11, 2014, 11:23 pmsounds like a winner to me...thanks.
BTW, on the topic of accessories for the SDB,
How much higher does the Strong Mount raise the SDB from the bench?
I'm building a second reloading bench for the SDB, since the one I've been using is also holding the XL650 and it's crowded....
sounds like a winner to me...thanks.
BTW, on the topic of accessories for the SDB,
How much higher does the Strong Mount raise the SDB from the bench?
I'm building a second reloading bench for the SDB, since the one I've been using is also holding the XL650 and it's crowded....
Quote from Reloader on June 11, 2014, 11:33 pmWhoops, never mind, 8 inches increase....should have read product description first....thanks.
Whoops, never mind, 8 inches increase....should have read product description first....thanks.