Unknown Item
Quote from Reloader on January 1, 2017, 2:41 amI recently received an order from Dillon consisting of a SD Conv 9mm, SD/JR Toolhead Assembly, Locator Pin #1 and an SD-B Manual. My problem is I also received an item which I have no clue about. I was hoping to post a picture of it but am not able to see how I can do it on this site. It is about 5/8ths of an inch long (overall) with a ''head'' on top about 1/8'' long. The ''head'' is 3/16ths thick and the body (below the head) is 1/16'' thick. It was in a small plastic bag but had no number or any other description. I have been checking the manual and as yet haven't found any number or description. A name, number and use of this would be appreciated.
I recently received an order from Dillon consisting of a SD Conv 9mm, SD/JR Toolhead Assembly, Locator Pin #1 and an SD-B Manual. My problem is I also received an item which I have no clue about. I was hoping to post a picture of it but am not able to see how I can do it on this site. It is about 5/8ths of an inch long (overall) with a ''head'' on top about 1/8'' long. The ''head'' is 3/16ths thick and the body (below the head) is 1/16'' thick. It was in a small plastic bag but had no number or any other description. I have been checking the manual and as yet haven't found any number or description. A name, number and use of this would be appreciated.
Quote from Reloader on January 1, 2017, 3:40 amSounds like a decapping pin. Take a look at the sizing die of the caliber conversion and see if it is the same size as the pin on the end. Most dies come with a spare decapping pin.
Sounds like a decapping pin. Take a look at the sizing die of the caliber conversion and see if it is the same size as the pin on the end. Most dies come with a spare decapping pin.