XL650 Mounting Hole Pattern

#1 · March 15, 2015, 9:02 pm

Hi Guys,
I just bought my first Dillon!!!! Granted it's used, but hey you have start somewhere. While I wait for it to arrive, I'd like to get my reloading bench switched from Hornady to Dillon.

I am hoping one of you could please provide me the mounting bolt pattern? I read the online manual and it says to use the press as a guide....well I don't have the press yet.

I would GREATLY appreciate (A) Distance from from edge of bench to front holes (B) Distance from front edge of bench to rear holes (C) Center of hole to center of hole left to right, front to make etc. Also what diameter are the mounting holes in the press?

I will NOT be using any sort of mount, it will be bolted directly to bench top.

Any and all help you guys and gals can provide is greatly appreciated. If you can't tell I am eager to get my Dillon up and running.

Thanks

#2 · March 18, 2015, 6:39 pm

WOW - getting a used one is cool in it's self. Wish I could pick up a good used one. Congratulations!! I would love to have two - one for large Primers and one for small Primers. I know it is easy to switch out but having two would neat! I don't know the hole patterns but I am sure someone can get you that information here pretty soon.

#3 · March 30, 2015, 1:39 am

Take my word for it you want it mounted just so. I would wait for it to get there and only have to do it once. I currently have a30 year old RL550 and a two year old 650