Forum breadcrumbs - You are here:Reloader ForumDillon Reloading Equipment: XL650XL650 Woes-Seek Help
Please Login to create posts and topics.
XL650 Woes-Seek Help
Reloader@dillonprecision
15,700 Posts
#1 · March 6, 2012, 6:40 am
Quote from Reloader on March 6, 2012, 6:40 amPurchased 650 6 months ago and have had several issues, most tinkered with and solved as we all do with various re-loaders, but have hit a wall.
Set up 650 to load 9mm, and while running a spent case dropped between chute/bin mount and frame, and before I could stop handle travel, heard a loud "TWANG". Result: chute bent, and platform will not travel fully up or down to seat primer. Ordered new chute/bin mount, installed, and still will not function properly.
If there are any XL650 experts that are willing to travel to my place(20 miles north of Seattle, Wash.-Mukilteo, 15 minutes off I-5), analyze, repair and familiarize me with some advanced functions I will compensate for time and travel per agreed upon terms.
I own several re-loaders, have 18 years experience with pistol and small rifle, and have never felt as frustrated as I have with this system.
I have a very flexible schedule, and am available most any time.
Purchased 650 6 months ago and have had several issues, most tinkered with and solved as we all do with various re-loaders, but have hit a wall.
Set up 650 to load 9mm, and while running a spent case dropped between chute/bin mount and frame, and before I could stop handle travel, heard a loud "TWANG". Result: chute bent, and platform will not travel fully up or down to seat primer. Ordered new chute/bin mount, installed, and still will not function properly.
If there are any XL650 experts that are willing to travel to my place(20 miles north of Seattle, Wash.-Mukilteo, 15 minutes off I-5), analyze, repair and familiarize me with some advanced functions I will compensate for time and travel per agreed upon terms.
I own several re-loaders, have 18 years experience with pistol and small rifle, and have never felt as frustrated as I have with this system.
I have a very flexible schedule, and am available most any time.
Set up 650 to load 9mm, and while running a spent case dropped between chute/bin mount and frame, and before I could stop handle travel, heard a loud "TWANG". Result: chute bent, and platform will not travel fully up or down to seat primer. Ordered new chute/bin mount, installed, and still will not function properly.
If there are any XL650 experts that are willing to travel to my place(20 miles north of Seattle, Wash.-Mukilteo, 15 minutes off I-5), analyze, repair and familiarize me with some advanced functions I will compensate for time and travel per agreed upon terms.
I own several re-loaders, have 18 years experience with pistol and small rifle, and have never felt as frustrated as I have with this system.
I have a very flexible schedule, and am available most any time.
Click for thumbs down.0Click for thumbs up.0
#2 · April 18, 2012, 5:23 pm
Quote from Reloader on April 18, 2012, 5:23 pmTacomike;
I live in Snohomish so I'm fairly close to you. I have been reloading on the XL-650 since the early 90's. Email me and lets see if we can't get your problem ironed out.
Eric.
Tacomike;
I live in Snohomish so I'm fairly close to you. I have been reloading on the XL-650 since the early 90's. Email me and lets see if we can't get your problem ironed out.
Eric.
Click for thumbs down.0Click for thumbs up.0