XL750 stopped auto-indexing

#1 · April 18, 2020, 9:28 pm

Just set up and ran some through with the powder measure installed. Then removed it and now it won't auto-index.

Did I knock something loose? or what?

Terry

#2 · April 19, 2020, 3:55 am

You most likely broke your indexer ring.

#3 · April 25, 2020, 1:22 am

I'll check and see. It now seems to work intermittently. Thanks!

#4 · August 19, 2020, 4:00 am

I've found that some times if you are depriming the old primer doesn't drop out and the spent primer tries to roll under the case as it's being indexed. Loosen the center shell plate bolt enough to allow you to get the brass out and remove the old primer.