Mr. Bullet Feeder does not work properly on XL750?
Quote from Reloader on April 17, 2020, 4:24 amI spoke to a Australian Dillon distributer a few hours ago.
Good news - Double Alpha are currently manufacturing a part to solve the problem with Dillon 750 and Mr Bullet Feeder. Powder check in position 3 and Mr Bullet feeder position 4. He didn't know exactly when this modification would be available, however hopefully very soon. JR
I spoke to a Australian Dillon distributer a few hours ago.
Good news - Double Alpha are currently manufacturing a part to solve the problem with Dillon 750 and Mr Bullet Feeder. Powder check in position 3 and Mr Bullet feeder position 4. He didn't know exactly when this modification would be available, however hopefully very soon. JR
Quote from Reloader on April 19, 2020, 12:52 amWith the global supply chain being what it is, I think it may be a bit of a wait. Still, when it’s available, I’ll probably order the part and probably one of his powder checkers to keep it company on the journey.
With the global supply chain being what it is, I think it may be a bit of a wait. Still, when it’s available, I’ll probably order the part and probably one of his powder checkers to keep it company on the journey.
Quote from Reloader on April 23, 2020, 5:42 amMessage from DA
DA are currently working on a solution – which is a modified and shorter Dillon charge bar. That, when it extends it wont hit the dropper.
It is in production now and expect it will be added to DA’s assortment in approx 4 weeks time.
Message from DA
DA are currently working on a solution – which is a modified and shorter Dillon charge bar. That, when it extends it wont hit the dropper.
It is in production now and expect it will be added to DA’s assortment in approx 4 weeks time.
Quote from Reloader on April 27, 2020, 12:59 pmSimple fix that I did for now until the fix is available. Take off the fail safe bar. Zip tie together the 2 levers so they clear the powder housing. Use springs to activate the return on the powder measure. Turn the powder measure. Powder measure has worked fine in this configuration. I have an old SD that uses a spring (much heavier then the ones Dillion now provides). Currently my set up, station 1 dillion sizer, station 2 dillion powder with DAA flare, station 3 dillion powder check, station 4 mini mr bullet feeder, and station 5 DAA seat crimp die. Only have loaded 3000 rounds but no problems.
Simple fix that I did for now until the fix is available. Take off the fail safe bar. Zip tie together the 2 levers so they clear the powder housing. Use springs to activate the return on the powder measure. Turn the powder measure. Powder measure has worked fine in this configuration. I have an old SD that uses a spring (much heavier then the ones Dillion now provides). Currently my set up, station 1 dillion sizer, station 2 dillion powder with DAA flare, station 3 dillion powder check, station 4 mini mr bullet feeder, and station 5 DAA seat crimp die. Only have loaded 3000 rounds but no problems.
Quote from Reloader on April 27, 2020, 1:24 pmJust a note on my last post. If using the new springs from dillion you will need to use 2 springs.
Just a note on my last post. If using the new springs from dillion you will need to use 2 springs.
Quote from Reloader on May 1, 2020, 8:32 pmI have been running a Lee auto drum on my 750 with good results. Very accurate and you can have a bullet feeder anywhere after the powder drop.
I have been running a Lee auto drum on my 750 with good results. Very accurate and you can have a bullet feeder anywhere after the powder drop.
Quote from Reloader on May 14, 2020, 11:14 pmDAA have manufactured a shorter replacement powder charge bar.
Shipment expected within the next two weeks.
DAA have manufactured a shorter replacement powder charge bar.
Shipment expected within the next two weeks.