Forum Navigation
Please Login to create posts and topics.
Post History: Reloader
If you are going to dispose of the brass fill cases with penetrating oil and let soak then crush the …In: Depriming Live Primers
17 years ago
Depriming live primers is hazardous, as it is very easy to set one of while depriming. If you must, …In: Depriming Live Primers
17 years ago
I have about a dozen 45ACP shells that I have reprimed with fresh primers that are oversized. …In: Depriming Live Primers
17 years ago
I have some 45ACP once fired brass that have a knurling around the diameter about half way down the …In: Federal Brass
17 years ago
I goofed and posted an incomplete/wrong link. It is HTTP://WWW.SightM1911.Com/Care/45 …In: 45acp Tolerances
16 years ago
Try this link. It is a good site for 1911 info. www.sightm19711.com/care/45acp.htm & …In: 45acp Tolerances
16 years ago
I was wondering if anyone can tell me where I can find the tolerances for the brass for 45ACP?   …In: 45acp Tolerances
17 years ago
The Quick Change does not include the powder funnel. The funnel is included in the caliber conversio …In: Quick Change Question
17 years ago
Well in just 7 days I had ordered , shipped over 3500 miles , unpacked and put together.....my new X …In: Quick Change Question
17 years ago
The 7.62 x 39 trimmer uses a different motor assembly than the other calibers because the shortness …In: 7.62x39 Rapid Trim 1200 B Size/Trim Die
17 years ago
The Rapid Trim 1200 B Size/Trim Die for the 7.62x39 caliber is showing up as $224.95 when the other …In: 7.62x39 Rapid Trim 1200 B Size/Trim Die
17 years ago
You can buy 7.62x39 cheaper than you can reload it. Even if you have good brass (not likely if it wa …In: XL650 Caliber Conversions
16 years ago
For .223, you might want to add a quick change, or at least another toolhead and powder die so you c …In: XL650 Caliber Conversions
17 years ago
I'm looking at getting an XL650, but I had some questions on what I would need for caliber conv …In: XL650 Caliber Conversions
17 years ago
Yep, my motor went out last week. I do not use it a lot so the hours are not great. The lower bear …In: CV-2001 Motor problems
6 years ago
In defense of the big tumbler, I've had mine for 4 years and it gets a lot of use. Over 3 tons …In: CV-2001 Motor problems
9 years ago
WOW, I was thinking about buying one, had just about talked myself into it and I find this informati …In: CV-2001 Motor problems
9 years ago
I was kinda taken aback when they wanted $100+ to fix my CV-2001. This was my second one.  …In: CV-2001 Motor problems
12 years ago
Same problem with both my OLD one and the NEW one. Called and was told to ship them at my expe …In: CV-2001 Motor problems
17 years ago
Mine went out also just after a year, and with very little use,i think they had some problems with t …In: CV-2001 Motor problems
17 years ago
The warranty on electric/electronic components is indeed one year. For out of warranty mo …In: CV-2001 Motor problems
17 years ago
Hi all.... I have a bit of a problem.... Has anyone else had a problem with the motors on the CV-200 …In: CV-2001 Motor problems
17 years ago
This won't be heard until late this year or early next year, with results announced in Spring 2 …In: Supreme Court to hear NRA vs Chicago
17 years ago
What ever happened with this. I heard they where supposed to hear it but did they make a decision?In: Supreme Court to hear NRA vs Chicago
17 years ago
I live just outside of chicago and hope things can get changed, whatever happens in Chicago has a be …In: Supreme Court to hear NRA vs Chicago
17 years ago
17 years ago
You only need a size die and a taper crimp die. All other conversion parts are the same as 9mm.In: 38 Super
17 years ago
17 years ago
38 Super uses the same shellplate, locator pins & powder funnel as 9mm. You need a different siz …In: 38 Super
17 years ago
Hello again! Quick question - I have a SDB, which I love btw. I have the dies for 38/357, 9mm & …In: 38 Super
17 years ago
I have fabricated my own holder for my extra SDB powder measure measure/tooling assembly. I took an …In: Tool Head Stands
16 years ago
I am a little bit taken aback by that. Dillon offers a quick-change for the Square Deal, just …In: Tool Head Stands
17 years ago
We have never offered a toolhead stand for the Square Deal machine, and have no plans to at this tim …In: Tool Head Stands
17 years ago
I've got an XL650 and an SDB (which is older by far than the 650). I tried to use the too …In: Tool Head Stands
17 years ago
17 years ago
I need some primers for my black powder rifle but have been unable to locate any? Does anyone know o …In: Where can I find primers?
17 years ago
Contact them, they might have the part available. Maurice Drummen is more likely to have it in stock …In: primer system assembly spare part
17 years ago
Hi "Dillon".
Thanks already for the answer. I wasn't aware this can be replaced unde …In: primer system assembly spare part
17 years ago
We suggest you contact Maurice Drummen at Drummen Custom Guns in the Netherlands. http://mauricedr …In: primer system assembly spare part
17 years ago
Hi "Dillon".
Thanks already for the answer. I wasn't aware this can be replaced unde …In: primer system assembly spare part
17 years ago
Hi "Dillon".
Thanks already for the answer. I wasn't aware this can be replaced unde …In: primer system assembly spare part
17 years ago
The part # is 14003 for the red large tip. It is available separately. If you need to replace a dama …In: primer system assembly spare part
17 years ago
Hi, At the bottom of the primer assembly tube (part 22031 - Large), sits a red plastic part. What� …In: primer system assembly spare part
17 years ago
Buy the RL550, the dies for your first caliber, a powder scale, and a good book. From there you …In: WTB used equipment
16 years ago
Looking to buy used equipment to get started reloading. Not sure what all I need. otherwise I would …In: WTB used equipment
17 years ago
Use the 550 strongmount, take a piece of 1/2" alum plate and mount that to the strongmoun …In: Strong Mount
15 years ago
I would like to raise a different press above the bench a bit. Would it be possible to use a st …In: Strong Mount
17 years ago