Please to create posts and topics.

Post History: Reloader

Reloader

User

Recently bought a XL650. New primers are not loading and seating into the shell casing after ejectin …In: Primer Issues

8 years ago

I have loaded thousands of rounds of 9 mm and .357 sig and have had great success. Not any of the is …In: Dillon xl650 Lemon

8 years ago

Ever think of writing a manual? Great write up!In: Dillon xl650 Lemon

8 years ago

I’ve found the 650 to require a lot of maintenance to keep running right. I have dies set to resize …In: Dillon xl650 Lemon

8 years ago

Do you have anyone in your area that uses a 650 that can come over and look at your setup? Most of …In: Dillon xl650 Lemon

8 years ago

Trent, My apologies for not responding earlier. I simply failed to see your post. I looked up your …In: Dillon xl650 Lemon

8 years ago

I've been reloading for about 2 years now. And, I don't know if anybody else has the same …In: Dillon xl650 Lemon

8 years ago

the face of the punch doesn’t protrude above the face of the surrounding bushing But im not sure if …In: Primer seat assbly sm ver2

8 years ago

Does the face of the punch protrude above the face of the surrounding bushing? Is the top of the bus …In: Primer seat assbly sm ver2

8 years ago

Hi yes i just put my small primer assbly in had large an it work fine an with the small the shell pl …In: Primer seat assbly sm ver2

8 years ago

Note: my use of "up/down strokes" are in reference to the operating handle, which is the r …In: Shell plate not moving

5 years ago

That just happened to me after reinstalling my shell plate. Turns out I forgot to tighten the set sc …In: Shell plate not moving

8 years ago

I am kinda having the same issue with mine I just put my small primer seater in snug it and it jams …In: Shell plate not moving

8 years ago

Remove the shellplate, then cycle the handle down and up. During the up stroke, you should see the i …In: Shell plate not moving

8 years ago

Just for sake of clarity, the shellplate indexes when the handle is being returned to the "up&q …In: Shell plate not moving

8 years ago

I have a 650 XL and loaded about 900 rounds of 9mm this weekend. Abruptly the shell plate stopped r …In: Shell plate not moving

8 years ago

We started shipping CP2000 machines on Monday. We have filled the backorders, and have a few on the …In: CP2000 release date?

6 years ago

Anything on this? I can barely contain my excitement, last I heard it was mid December, which is in …In: CP2000 release date?

6 years ago

Yes they are not fourth coming with meaningful information regarding the release date. However I wou …In: CP2000 release date?

7 years ago

*****cricket sounds*****In: CP2000 release date?

7 years ago

Looking like mid-September for a time frame to begin shipping the RL1100 and CP-2000 machinesIn: CP2000 release date?

7 years ago

Any news on the release date? Last time I was told mid July..In: CP2000 release date?

7 years ago

There is a delay they will release a machine 10 stations.In: CP2000 release date?

7 years ago

Dillon's silence isn't reassuring!In: CP2000 release date?

7 years ago

Considering they don't have any information listed on the site, I would guess it won't be …In: CP2000 release date?

7 years ago

Any news on the release date for the RL1100 and CP2000? Im hearing rumors of November.In: CP2000 release date?

7 years ago

Looks like mid July now. We had to tweak one mold that produces 3 parts.In: CP2000 release date?

7 years ago

It's been over a month since the last update for delivery. Any update? Still mid Mid Summer, So …In: CP2000 release date?

7 years ago

Due to an unforeseen manufacturing delay by one of our U.S. suppliers, the release of the CP2000 &am …In: CP2000 release date?

7 years ago

We are waiting on some parts to be made. Best guess is late May or early June.In: CP2000 release date?

7 years ago

I messaged them a week or two ago asking about ship dates and was told that they would let everyone …In: CP2000 release date?

7 years ago

Is there any updates on the expected release date? I am holding off several projects because of wha …In: CP2000 release date?

7 years ago

Thanks Walter, sounds like something I would definitely want.In: CP2000 release date?

8 years ago

This model is a case preparation machine that has been engineered for increased strength and ease of …In: CP2000 release date?

8 years ago

Ok, I give up, what's the CP2000?In: CP2000 release date?

8 years ago

I've called a couple times. The first time, right before the official start of spring, I was to …In: CP2000 release date?

8 years ago

This had a proposed release time of Spring 2018. It is almost fall, anything Dillon can share?In: CP2000 release date?

8 years ago

I have just given up and using the Dillon to reload .338 LM. Tonight was the 3rd time I lost a piec …In: .338 Lapua Safety Issue on RL550

5 years ago

Tried loosening the bolt as instructed. Still having problems getting subsequent rounds into battery …In: .338 Lapua Safety Issue on RL550

7 years ago

Lapua has changed the dimensions on the extractor groove and rim five times since the inception of t …In: .338 Lapua Safety Issue on RL550

8 years ago

Just purchased a new conversion kit for .338 Lapua Mag for the old RL550B. I inserted the first piec …In: .338 Lapua Safety Issue on RL550

8 years ago

Thank youIn: Dillon Digital Scale (drift?)

8 years ago

You can let it warm up 30 minutes or so, but as long as you press the 'Zero' button before …In: Dillon Digital Scale (drift?)

8 years ago

Is there a recommended warm up period that would minimize this? I know of some scales that recommen …In: Dillon Digital Scale (drift?)

8 years ago

As digital scales warm up, the load cells slowly expand, and the displayed weight will drift slowly. …In: Dillon Digital Scale (drift?)

8 years ago

I am using Dillon 550C powder measure and Dillion Precision digital scale. Failsafe rod is adjusted …In: Dillon Digital Scale (drift?)

8 years ago

This area is for Mr. Bulletfeeder issues only. For your query, clean the interior of the die using b …In: 223 Cases Keep Sticking

8 years ago

Has anyone else had problems with 223 cases getting stuck? I’m using steel Dillon dies on an xl650. …In: 223 Cases Keep Sticking

8 years ago

This area of the forum is for the setup of the Mr. Bulletfeeder. You should of posted in the 550 are …In: 550C Strong mount

8 years ago

I guess since no one has answered I will find out myself when the press arrives on tuesday. Looks li …In: 550C Strong mount

8 years ago