Forum Navigation
Please Login to create posts and topics.
Post History: Reloader
Jason,
I load all those calibers as well as whole bunch of others. The route I took is a quick cha …In: What parts for a 9mm to 40 S&W and 556?
7 years ago
I forgot to mention...
I'll be using a qd mount for my powder measure from Uniquetek and a pow …In: What parts for a 9mm to 40 S&W and 556?
7 years ago
I've been reloading for almost 25 years on a Rock Chucker and about 10 using the Lee Classic Tu …In: What parts for a 9mm to 40 S&W and 556?
7 years ago
Try this:
With primers in the magazine tube, pull the handle down. With the handle still in the down …In: SDB Persistent Primer Feeding Problems — HELP!
7 years ago
2010ish, refurbished in 2015/16. The roller is brass. Total loaded about 90,000-100,000 rounds betwe …In: SDB Persistent Primer Feeding Problems — HELP!
7 years ago
Approximately how old is your SDB? About how many rounds have you loaded on it? Is the roller on you …In: SDB Persistent Primer Feeding Problems — HELP!
7 years ago
I’ve been having persistent issues with my SDB automated primer feeding system since I purchased it …In: SDB Persistent Primer Feeding Problems — HELP!
7 years ago
I purchased a used 550B and decided to have it rebuilt. I got it back today and I had to thank every …In: FANTASTIC JOB!!!
7 years ago
A pin protruding down from #16723, the primer feed body, aligns the primer transfer arm #16691 and t …In: Primer Feed
7 years ago
Why do you not make upwards arm in 6691 longer ?
When platform goes up and 17639 and 17132 meets, 1 …In: Primer Feed
7 years ago
Found it. Needed to taken off the strong mount. The shaft is then easy to remove with opening the bo …In: SDB Major disassembly
7 years ago
I think I managed to break the "Spent Primer Track Cover" (Stock # 13479) after clearing a …In: SDB Major disassembly
7 years ago
7 years ago
7 years ago
I went into my LGS, who is a Dillon dealer, and bought a Dillon roller handle. I got home and instal …In: Roller Handie
7 years ago
No. The 550/650 machines use a larger, 3/8" detent ball.
The Square Deal B uses a small 3/16&q …In: index/detent ball
7 years ago
Consider offering an XL650 Quick Change Kit bundled with the color anodized toolheads!
I priced eac …In: XL 650 QUICK CHANGE with Anodized Toolhead?
7 years ago
I was notified by UPS that my press arrived at your dock at 9:09 this morning. Thank you for providi …In: TURN AROUND TIME
7 years ago
Once we receive a machine, the typical in-house turnaround time is 3-5 business days right now.In: TURN AROUND TIME
7 years ago
Last Tuesday I sent my 550B to you for a rebuild. I was wondering what the turn around time is? I� …In: TURN AROUND TIME
7 years ago
Never mind.
Was growing old waiting on a reply.
Found out what I needed and have it on the way.In: Which parts needed for manual weighing of powder charges for rifle loads on my 550C ?
7 years ago
Can't seem to find a way to link the pics in here.In: Which parts needed for manual weighing of powder charges for rifle loads on my 550C ?
7 years ago
https://imgur.com/K3bnIghIn: Which parts needed for manual weighing of powder charges for rifle loads on my 550C ?
7 years ago
7 years ago
Howdy folks. I've recently bought a new XL650 and 550C and will be setting them up as soon as …In: Which parts needed for manual weighing of powder charges for rifle loads on my 550C ?
7 years ago
I had just set up my 550 for 308 this morning. Everything went together except the powder measure. T …In: Hard time with extruded powder
6 years ago
I just got a used 550b with .223 conversion and set it up recently. I already like it as it is dropp …In: Hard time with extruded powder
6 years ago
Found out how to load with extruded powder.......
The problem I was having was that I was lubing my …In: Hard time with extruded powder
7 years ago
I was having a heck of a time trying to load some .223 with IMR 4166 extruded powder. I have the RL4 …In: Hard time with extruded powder
7 years ago
You need to flare the case mouth to .020" larger than a sized, unflared case mouth, for the coa …In: 9mm powder funnel
7 years ago
well i figured if Dillon did not reply be now there is no replacement, what i did was a 10 minute pe …In: 9mm powder funnel
7 years ago
I have similar concerns with coated lead bullets.
I'm thinking about using the Mr. Bulletfeede …In: 9mm powder funnel
7 years ago
on my dillon 550 purchased new around 1997, lately i have been having some coating scraping off on m …In: 9mm powder funnel
7 years ago
RL-450 - My very old E – 13782 45 acp powder funnel is oval. It runs from .448" to .4495" …In: Diameter of Powder funnel 45 acp
7 years ago
Thank you dah. I took the slide out and measured it last week. It was at 1.216. While it was apart I …In: 550c Priming Issues (flipping/double feed)
7 years ago
Addendum, on my Dillon 550b, the Slide Pickup Adjustment Screw is backed out to the point where it …In: 550c Priming Issues (flipping/double feed)
7 years ago
A few possibilities come to mind. Firstly, check the plastic end on the primer magazine tube to be …In: 550c Priming Issues (flipping/double feed)
7 years ago
I guess IMG codes dont work on here and I cant seem to edit my post. So here is the pic URL
https:/ …In: 550c Priming Issues (flipping/double feed)
7 years ago
Hello,
I loaded up 200 rounds of 223 last night and had an issue with federal match ar small rifle …In: 550c Priming Issues (flipping/double feed)
7 years ago
I'll give the 10 month update to my original question. This forum really moves at warp speed, …In: Range Bag & Border Shift Bag
6 years ago
What is different about the new bag ?
Different dimensions, configuration or other ?In: Range Bag & Border Shift Bag
6 years ago
I just received a new Dillon Range bag today, had I not opened it I would send it back. My original …In: Range Bag & Border Shift Bag
6 years ago
Guess not.
Looks like it's gonna be another MidwayUSA range bag then.In: Range Bag & Border Shift Bag
7 years ago
Does anyone have a link to other pictures of these bags ?
It's hard to see much detail about t …In: Range Bag & Border Shift Bag
7 years ago
7 years ago