Forum Navigation
Please Login to create posts and topics.
Post History: Reloader
I'm loading .38 "mid" Colts (0.900" case length) on my XL-650 using a Dillon .38 …In: .38 Short Colt
7 years ago
I'm loading .38 "mid" Colts (0.900" case length) on my XL-650 using a Dillon .38 …In: .38 Short Colt
7 years ago
Hello,
I want to start loading .38 Short Colt on my 650 and I already own the calibre conversions f …In: .38 Short Colt
7 years ago
I'm having the same problem wit my new super 1050 but it happens a lot more on my machine. Hope …In: Primer ejector inconsistent...
5 years ago
7 years ago
One of two things,
1. You have a broken e-clip at the top of your decapping stem.
2. The spring in …In: Primer ejector inconsistent...
7 years ago
7 years ago
I have Super 1050 and reload 9mm cleaned range brass from Everglades. I am finding that the resizer …In: Primer ejector inconsistent...
7 years ago
Hi,
I have a problem with the RF100 primer feeder and I have to replace the electronic board. Unfort …In: RF100 Cable and motor
7 years ago
I have noticed on Ebay a couple of aftermarket, quick disconnect devices for Dillon powder measures. …In: Powder measure quick-disconnet.
7 years ago
I got the rheostat, and installed it. I do like that I can control the speed, but I am still having …In: rf100 shakes anvils from primers
7 years ago
I would recommend purchasing the rheostat upgrade kit. I suspect a diode is damaged on your existing …In: rf100 shakes anvils from primers
7 years ago
Helloooo....
I was hoping the post from Dillon meant I was getting helped. As I said, there is no s …In: rf100 shakes anvils from primers
7 years ago
How old is your RF100? This is not a problem we've run into before. Does your RF100 have a rheo …In: rf100 shakes anvils from primers
7 years ago
Am I the only one with this problem? Primer feed speeds up dramatically, primers bouncing around, a …In: rf100 shakes anvils from primers
7 years ago
My RF100 started speeding up, shaking the primers frantically. I am having multiple primers per tub …In: rf100 shakes anvils from primers
7 years ago
This happened to me last week. What cured mine was removing the primer disk with all the holes in …In: primers flipping large pistol
7 years ago
I started doing a batch of 45 on Sunday and maybe every 10 or 15 the primer would flip on to it' …In: primers flipping large pistol
7 years ago
I just got an RL1000 from a friend. I am also looking for the balance springs. In an email reply fr …In: RL 1000 Springs
6 years ago
Wow, no responses at all. I knew those machines were old, but hoped there were others out there run …In: RL 1000 Springs
7 years ago
I need the main springs for this press. My local old fashioned hardware store sells a spring that&# …In: RL 1000 Springs
7 years ago
7 years ago
When loading a single round at a time you do not have the tension on the head from a case in the siz …In: 9mm bullet lenght
7 years ago
New to the club 650. Have dies set and consistently get a length of 1.160. If I take a single c …In: 9mm bullet lenght
7 years ago
Addendum: Large primers not seating deep enough.
I would like the Dillon staff to respond to this. …In: Large primers not seating deep enough.
5 years ago
Note: I have slightly relieved the contact point on the Primer Housing and Shield using a grinding b …In: Large primers not seating deep enough.
5 years ago
"I have examined my 550b carefully as to what appears to act as a "stop" when priming …In: Large primers not seating deep enough.
5 years ago
I never liked the primer seating on the 550. The feel was rough and it seemed like there was too mu …In: Large primers not seating deep enough.
5 years ago
I have examined my 550b carefully as to what appears to act as a "stop" when priming. I h …In: Large primers not seating deep enough.
6 years ago
Have same issue and it seems to be happening with large & small primers. Looks like roller brack …In: Large primers not seating deep enough.
6 years ago
In my perusal of a google search on "550b high primers" I can across an old thread in the …In: Large primers not seating deep enough.
7 years ago
The primer punch is supposed to get stuck in the brass when there is no primer. It is a way to let y …In: Large primers not seating deep enough.
7 years ago
"If the primer punch is going into the brass and sticking when you don't have a primer on …In: Large primers not seating deep enough.
7 years ago
If the primer punch is going into the brass and sticking when you don't have a primer on it, th …In: Large primers not seating deep enough.
7 years ago
The two .003 shims were minimally effective. Primers still slightly proud of flush in the primer po …In: Large primers not seating deep enough.
7 years ago
I checked the powder rod...it is not interfering with primer seating.
I also find that by pushing …In: Large primers not seating deep enough.
7 years ago
Another thing to check is to look and see if the wing nut on the powder return is to tight. If it is …In: Large primers not seating deep enough.
7 years ago
The same thing happened to me, and I noticed that the handle had some spring to it when I pushed bac …In: Large primers not seating deep enough.
7 years ago
I have recently switched from the small primer system to the large system. Small primers were seati …In: Large primers not seating deep enough.
7 years ago
Three customer service reps load 6.5 Grendel, all using an AR platform, and all are using the Reddin …In: 6.5 grendel reloading
7 years ago
I'm about to start reloading 6.5 grendel, I'd love to hear from some folks that are reload …In: 6.5 grendel reloading
7 years ago
This is my routine with once fired raw brass, military and commercial.
Dedicated toolhead set up:
…In: .223 reloading on 650
7 years ago
Reese,
If you are going to be reloading lots of 223, I'd get a second tool head for the trimm …In: .223 reloading on 650
7 years ago
New to rifle reloading and have a question. I’m confused on resizing and trimming. After resizing do …In: .223 reloading on 650
7 years ago
At 25 yards, this has zero affect on accuracy. To reduce this, try loosening the die lock rings on b …In: uneven primer hole
7 years ago
I've been using a Lee universal decapping die, in it's own toolhead, to deprime cases. I t …In: uneven primer hole
7 years ago