Forum Navigation
Please Login to create posts and topics.
Post History: Reloader
I have been wondering for the last couple years if the 3" convertion is coming out.
It is the o …In: 3" conversion
7 years ago
15 years ago
Hey - it is Nov. 2010 - what is the reply here? Will 3" be offered?
Can I take an SL900 t …In: 3" conversion
16 years ago
It is soon to be brought back to a front burner. Our soon to be available 50BMG progressive lo …In: 3" conversion
17 years ago
I noticed that Dillon support made the following statement to another user here: "20 ga …In: 3" conversion
17 years ago
Yeah, I kind of figured that so I already ordered it along with some other parts in my quest to get …In: Primer Feed Issues and Click at the end of stroke
17 years ago
On the older Square Deals, there was no overtravel stop set screw. If the shellplate fails to …In: Primer Feed Issues and Click at the end of stroke
17 years ago
I am having a similar problem (not fully indexing) but it appears that my SDB doesn't have the …In: Primer Feed Issues and Click at the end of stroke
17 years ago
Thanks for the great advice, adjusting the set screw worked a charm. Cheers, James.In: Primer Feed Issues and Click at the end of stroke
17 years ago
With that information, it sounds like the index lever is not moving the shellplate quite far enough, …In: Primer Feed Issues and Click at the end of stroke
17 years ago
The click occurs as at the end of the strock as the shellplate finishes it's movement.In: Primer Feed Issues and Click at the end of stroke
17 years ago
The click occurs as at the end of the strock as the shellplate finishes it's movement.In: Primer Feed Issues and Click at the end of stroke
17 years ago
With the primer feed off the machine, does the click occur when the shellplate begins to rotat …In: Primer Feed Issues and Click at the end of stroke
17 years ago
Thanks for your reply. I have removed the primer feed and checked the measurement recommended and …In: Primer Feed Issues and Click at the end of stroke
17 years ago
I suspect the primer cup on the end of the primer slide is either no longer bottomed out in th …In: Primer Feed Issues and Click at the end of stroke
17 years ago
I have been reloading with a square Deal B for the last 10 years and it's been a reliable unit. …In: Primer Feed Issues and Click at the end of stroke
17 years ago
My XL650 on a 650-only Strongmount measures 40-3/4" above the bench top. Keep in mind y …In: Height above bench xl 650
17 years ago
You have 1/2" of room to play with. The newer 650's with casefeeder are only around 42 in …In: Height above bench xl 650
17 years ago
Thanks for the info. A friend of mine says his is 27" without the casefeeder or strong mount. s …In: Height above bench xl 650
17 years ago
Mine sets about 45"(top of casefeeder) above my benchtop. Wish I had a father-in -law li …In: Height above bench xl 650
17 years ago
I just found out 1 of my birthday gifts from my father-inlaw. Its a xl650. My question is he orderde …In: Height above bench xl 650
17 years ago
I use rcbs dies in my dillon 450 but had to put my crimp seat dies in a lathe and take .100 ff the b …In: Non Dillon dies
17 years ago
Any brand of 7/8-14 thread dies will work on the RL550, as long as they deprime in the size di …In: Non Dillon dies
17 years ago
Suggested brand dies for calibers Dillon does not offer? 7X30 waters for instance. Also: Pro …In: Non Dillon dies
17 years ago
It is recommended to use a water barrier such as paste car wax, or some of the various aerosol …In: Rust Prevention
17 years ago
I am getting rust on the powder funnel. (I live in FL and the high humidity does not help) The lowe …In: Rust Prevention
17 years ago
gobblr addict: Thanks for the reply. I did some on-line reading after I posted my note. Everyone …In: Redding 2-die Set
17 years ago
The Redding dies will work on your 550B. I would probably buy a set of Dillon .223's, as the bu …In: Redding 2-die Set
17 years ago
I currently reload .223Rem on a Rockchucker for my heavy-barreled varmint rifle using a Redding, Nec …In: Redding 2-die Set
17 years ago
Dillon does not support the 5.7 x 28 cartridge. It is too small in diameter to work, as the case hea …In: Reloading 5.7 x 28
17 years ago
Dillon does not offers a conversion kit for 5.7 x 28 . The dies are available from a couple sou …In: Reloading 5.7 x 28
17 years ago
The 45-120 is too tall to load on the XL-650. On the RL-550, there is just enough clearance to …In: 45-70 and 45-120 on a 650
17 years ago
My question is I need to load 45-120. I see they sell a kit for 45-70, everything the sa …In: 45-70 and 45-120 on a 650
17 years ago
The source of the brass will make a difference as to how easy/difficult it may be to resize. M …In: Once fired Lake City brass sizing die issues
17 years ago
I just finished 2k 1x LC cases today on my 650. My prep includes setting up a tool head with the FL …In: Once fired Lake City brass sizing die issues
17 years ago
Lake City makes military ammo. Military ammo = crimped primers. You need a swager to remove the crim …In: Once fired Lake City brass sizing die issues
17 years ago
I am having problems with station 1 working EXCESSIVELY hard trying to de-prime and re-sizing o …In: Once fired Lake City brass sizing die issues
17 years ago
As an FYI a guy is developing a counter and reloading warning system. He has it as a kit form and is …In: cartridge counter
17 years ago
MKfarm, Thank you for asking a question and then when you found the answer actually p …In: cartridge counter
17 years ago
Ok I see I should have read through all of the past threads. Just to expensive to make.In: cartridge counter
17 years ago
17 years ago
I change mine without any problems, if you have lot's of extra cash thoughIn: Changing Primer Feed Assemblies?
17 years ago
Thanks medalguy and dillon.....I will go home and give it a whirl dillon!In: Changing Primer Feed Assemblies?
17 years ago
It shouldn't be a big ordeal to change primer sizes on the 550B. You pull two bolts to remove t …In: Changing Primer Feed Assemblies?
17 years ago
Yep. I have 2 450's set up for large and small primers at my primary home and two more fo …In: Changing Primer Feed Assemblies?
17 years ago
My 550 came set up for .223's. I want to load pistol also. It looks like a pain to change out t …In: Changing Primer Feed Assemblies?
17 years ago
Dillon So why did one of your people on the 800 number recomend me use it for 30-06 ? It wor …In: XL650 with Case Feeder
17 years ago