Forum Navigation
Please Login to create posts and topics.
Post History: Reloader
I've just received my new CP2000. I bought the Blackout CP2000 conversion kit and that has also …In: CP2000 case trimmer.
5 years ago
I think it would be great if Dillon would make a new variant of the Square Deal...
The Square Deal …In: New Square Deal specifically for AR15 rounds (small rifle)...?
5 years ago
Before I start, I'm only detailing my experience here as opposed to detailing problems.
During …In: Priming System
5 years ago
The solution for me was to lower the cup height just a bit and install a new plastic end on the prim …In: New XL750 Owner, Primers not feeding
5 years ago
I was having primer not dropping problem as well. I did the flashlight test, etc. nothing worked. Th …In: New XL750 Owner, Primers not feeding
5 years ago
I am having the same problem, loading 9 mm, have done 500 then starting having this issue.In: New XL750 Owner, Primers not feeding
5 years ago
Did you ever figure the problem out. I'm having the same issue. I first set my reloaded up for …In: New XL750 Owner, Primers not feeding
5 years ago
Pages 48 and 49 in the XL750 User Instructions (Trouble Shooting Guide) details the single primer dr …In: New XL750 Owner, Primers not feeding
5 years ago
I tried google and searching the page, but I didnt see anyone with the same issue.
I have a new D …In: New XL750 Owner, Primers not feeding
5 years ago
Hi guys, I’m new here and to reloading. I’ve been setting up my new 750 and as above couldn’t get di …In: Problem with sizing/decapping die
5 years ago
Dillon dies have a larger radius to make it easy for the case to enter the die on a progressive mach …In: Problem with sizing/decapping die
5 years ago
Ok just got my XL-750 set up but still waiting on the 45acp die set. I have a RCBS 45acp carbide die …In: Problem with sizing/decapping die
5 years ago
one last thing.The powder measure clamp is now resting flat on the top of the depriming/sizing die(t …In: case flareing woes
5 years ago
update any readers(sob)
my OCD(self diagnosed) forced me back out to the ammo barn and after a …In: case flareing woes
5 years ago
If not, what could the culprit be?
I am at a loss , and after waiting for 45 minutes in the tec …In: case flareing woes
5 years ago
to finish my post:
I did find during my troubleshooting that the white nylon(?) bushing that fi …In: case flareing woes
5 years ago
long time(1996) sdb owner here.
Dusted off my SD week to change caliber over from 38 super to 4 …In: case flareing woes
5 years ago
Currently running a Dillon super 1050 with Mark 7 autodrive and sensors, currently waiting on a back …In: Toolhead setups to run .223 / subsonic .300 BO?
5 years ago
Hey Guys,
First time posting here, but I've read quite a few. I've been using a 550B for …In: RL1100 with RT1500 trimmer
5 years ago
Thanks for the reply. When I put the lock ring on the bottom it collides with the index star. My tho …In: RCBS small base 300 blk
5 years ago
5 years ago
I have been loading my 300 blk on a chucker for years. I’m using the rcbs small base dies which requ …In: RCBS small base 300 blk
5 years ago
Good afternoon,
No, you don't have an expensive paper weight. You just got a minor glitch that …In: XL750... at 5 rounds per hour with primer hell!
5 years ago
Okay, so maybe the title is somewhat frivolous, but it reflects my current frustration. I'm not …In: XL750... at 5 rounds per hour with primer hell!
5 years ago
I am trying to get in touch with them to get a ring indexer which sadly I am now finding to be a com …In: Where is Dillion???
5 years ago
Yeah Dillon has been totally MIA for me since November, ignoring my Emailed requests for warranty su …In: Where is Dillion???
5 years ago
The folks at Dillon are not scam artists, but they do need to update their backorder info on their w …In: Where is Dillion???
5 years ago
Same here. I’ve called 3 times only to wait over an hour each time to be disconnected. My press has …In: Where is Dillion???
5 years ago
Is anyone else having trouble getting in contact with Dillon? I have called and waited for over an h …In: Where is Dillion???
5 years ago
This may be the best after market upgrade I have purchased for any of my
presses. These rails work g …In: Spill Stop Locator Rails
5 years ago
I was just searching the same thing. Is this forum still monitored by Dillon? If so, can we can some …In: 300 PRC
5 years ago
Will the XL 750 have an option for 300 PRC in the future? I see quite a few options in the dropdown …In: 300 PRC
5 years ago
My RL1100 for 6.5 Creedmoor was ordered in November 2020. About a month ago I called Dillon and they …In: Wait times on RL1100
5 years ago
I loaded 100 for my granddaughter and the 550 is more than capable of reloading 350 Legend. There a …In: 350 Legend
5 years ago
Hey everyone. I was wondering what I should use on my RL550B to reload 350 Legend? Haven’t seen a co …In: 350 Legend
5 years ago
Without my press at my current location I can't see but I believe there is a stop point between …In: Broken link arm and crank (550B)
5 years ago
Just received a reply that they are shipping warranty replacement parts. Much faster than I anticipa …In: Broken link arm and crank (550B)
5 years ago
It’s about 9 years old. Probably loaded 30k+ rounds, mostly 9mm and 223.
Looking at it more closel …In: Broken link arm and crank (550B)
5 years ago
How old is your press? I cracked my crank😁 but after 30 years of use. This was before the virus an …In: Broken link arm and crank (550B)
5 years ago
5 years ago
Last night I was loading some 9mm and the right link arm on my 550B broke just above where it is att …In: Broken link arm and crank (550B)
5 years ago
I had a similar problem. Mine was caused by over tightening the shell plate bolt. I backed it out 1/ …In: Shell Plate Not Indexing Properly
5 years ago
I had the same problem with my XL750.
On the left side of the press under position #4 there are 2 Al …In: Shell Plate Not Indexing Properly
5 years ago
I have a Square deal, 550, 650 and a new 750.
I am not happy with the new 750 press.
I am having iss …In: Shell Plate Not Indexing Properly
5 years ago
To add to fishobaby's reply, both of the case feed adapters (380 & 233/556) are white, but …In: Conversion Kit
5 years ago