Forum Navigation
Please Login to create posts and topics.
Post History: Reloader
Thank you for your description! I was able to figure it out and get it back running again.
CheersIn: XL650 indexer return spring
6 years ago
I can tell you as I don't have a picture posting site to refer you to. From the post you have s …In: XL650 indexer return spring
6 years ago
Hello all. I was reloading today when a spring popped off, as pictured below
https://photos.smugmug …In: XL650 indexer return spring
6 years ago
Like you I have only had my 750 a very short time and loaded 100 x 9mm.
I've had other Dillon p …In: Happy with new XL750
6 years ago
After loading for 20 + years on my old XL650 I decided to add a second 650 to my bench only to find …In: Happy with new XL750
6 years ago
If primers aren't seating deep enough, first make sure the primer seating assembly is fully thr …In: primer seating punch adjustment
6 years ago
If the primer seater is not seating the primers all the way it is probably because something obstruc …In: primer seating punch adjustment
6 years ago
Is there any way of adjusting the primer seating punch to seat primers a little bit deeper into the …In: primer seating punch adjustment
6 years ago
Case feeder is not fully indexing and not allowing the casing to drop onto the shell plate. Any hel …In: case feeder
6 years ago
What's the difference between 30 M-1 carbine die set (62128) and 30-06 die set (62151)?In: Rifle dies info
6 years ago
Thanks! Checked the bolt, no issues.
However, i did as follows:
When shellplate was away i loosened …In: Case touches sizeing die
6 years ago
Remove the shellplate bolt, and check for a crack in it just above the threaded portion.
When reins …In: Case touches sizeing die
6 years ago
6 years ago
I have a small problem thats annoys me.
At station #1 when case de-primes and sizes my case get the …In: Case touches sizeing die
6 years ago
Is powder leaking between the powder bar and the spacer bar, or dropping out the funnel as the case …In: powder leaking
6 years ago
some powder is leaking from the powder bar when handle is moving back after processing the normal re …In: powder leaking
6 years ago
You can center the shellplate over the primer by adjusting the indexing cam which is attached to the …In: Primer install. Shell plate over indexing
6 years ago
I'm reloading 9mm Luger and have the machine set up. The shell plate seems to be over indexing …In: Primer install. Shell plate over indexing
6 years ago
What is the dimensions of the box that carries RL 1100 RELOADER and the weight?In: Box Dimensions in RL 1100 RELOADER
6 years ago
We plan to support the XL650 for years and years to come.
Unique parts include the platform, ring i …In: Which parts are unique to the 650?
6 years ago
I'm interested in knowing which parts are unique to the 650, and do not work with the new 750? …In: Which parts are unique to the 650?
6 years ago
6 years ago
Sounds like the set screw on the shell plate bolt is loose. As the plate turns it will lock down the …In: Shell plate lockup
6 years ago
The shell plate on my RL550B locks up when I advance it. Ihave to loosen the star after each strok …In: Shell plate lockup
6 years ago
Cold temperatures will have an effect on a digital powder scale, but the plastic magazine tips won&# …In: Reloading in the cold
6 years ago
Has anyone had problems reloading due to cold?
Just replaced everything in the primer feed
The f …In: Reloading in the cold
6 years ago
The carrier for the Teflon is a solvent. this removes the grease lubricant from the parts, and the T …In: Why no light oil or Breakfree?
6 years ago
I should add too that...per company statements and the MSDS, Breakfree actually doesn't contain …In: Why no light oil or Breakfree?
6 years ago
Thanks for the reply...still wondering, though, why? What's the problem with using it? You ref …In: Why no light oil or Breakfree?
6 years ago
motor oil, preferably 30wt, on the machine ram.
everything else that requires lubrication gets greas …In: Why no light oil or Breakfree?
6 years ago
Breakfree is a solvent with Teflon in suspension. It is not suitable for this application.In: Why no light oil or Breakfree?
6 years ago
Hello, I recently bought a new old stock 650 XL. Everything is basically new but the lubrication is …In: Why no light oil or Breakfree?
6 years ago
6 years ago
I use this to stop the next case from feeding
https://www.ebay.com/itm/164363968497
https://www.yout …In: Case feed
6 years ago
Hi Todd,
There are several after market things to stop these cases feeding in to the shell plate. …In: Case feed
6 years ago
When I am finishing a run of ammo, what is the best way to stop the case feed? I want to complete th …In: Case feed
6 years ago
Wow! 10 minutes on the phone with, Sam, from Dillon Precision technical support and my XL750 is runn …In: Cartridges won’t feed into shell plate
6 years ago
Brand new out of box XL750. Ordered with .223 conversion kit installed, .223 dies, .45 and 9mm EZ ch …In: Cartridges won’t feed into shell plate
6 years ago
6 years ago
My powder measure on my xl650 was rocking back and forth and causing the fail safe rod to hang up p …In: Loose Powder Measure
6 years ago
OK, The middle of the night it dawned on me what was going on...The 6.5 Grendle is a die/funnel. It …In: Powder Funnel
6 years ago
Just received a Dillon conversion for 6.5 Creedmoor(Dillon 550B Press) It came with Powder funnel &q …In: Powder Funnel
6 years ago
I stay with the small rifle plate. If you use a flat blade screwdriver, you can move the metal piece …In: 300AAC case feed
6 years ago
I use a large pistol plate with two spacer washers under the clutch assembly. I had to get longer sc …In: 300AAC case feed
6 years ago