Forum Navigation
Please Login to create posts and topics.
Post History: Reloader
I did a search and didn't see any one with this spent primer issue. When decapping and watching …In: spent primers
17 years ago
Ok. I have the bowl well secured at the top and it doesn't move. But, the brass now bungs up in …In: casefeeder jams up
17 years ago
The most common cause for this is the case feeder is swaying during operation, which flips the case …In: casefeeder jams up
17 years ago
My case feeder for my 550 constantly jams up with 9mm brass at the top funnel. Is there a fix for th …In: casefeeder jams up
17 years ago
did you make sure the blade is in the slot that is in the bottom of the feed tube. It is always best …In: primer tubes
17 years ago
Sounds like you failed to put the little cotter pin (Spring Clip) through that tiny little hole on t …In: primer tubes
17 years ago
Primers are supposed to go all the way thru the tube. The pickup tube has a spring clip to prevent p …In: primer tubes
17 years ago
When I try to use the small primer tube, the primers go all the way through the tube. I have tried s …In: primer tubes
17 years ago
GET THE STRONG MOUNT!!!!!!!! Trust me on it. You will be able to have a more comfortable bench heigh …In: Optimum Workbench Height
17 years ago
17 years ago
Hi Folks, I'm getting ready to install my new XL 650 and will be using the 650 only strong mo …In: Optimum Workbench Height
17 years ago
Some rocking motion is normal, and intentional. If this suddenly increased, detach the powder …In: Older Powder Measure
17 years ago
I have a 500 loader that I purchsed in 1985, it has performed wonderfully, and has loaded more round …In: Older Powder Measure
17 years ago
16 years ago
Iwould first degrease the interior of the powder funnel using a cotton swab and alcohol. This …In: 550b and 9mm
17 years ago
Hello, 1st time loader. Started out loading 40sw with Unique powder. Took my time getting all set up …In: 550b and 9mm
17 years ago
x4 on the lag bolts. I considered using all-thread and nuts, but decided I'd try some lag …In: Question about mounting 650
17 years ago
17 years ago
I used lag bolts with my 550 no strong mount and I have no problem. My bench design is similar. I on …In: Question about mounting 650
17 years ago
17 years ago
Thanks guys. I just wanted to make sure I had this thing locked down good 🙂In: Question about mounting 650
17 years ago
I would imagine long bolts with nuts and washers would work fine. If you don't plan on mo …In: Question about mounting 650
17 years ago
Hey Hooah - I mounted my 650 (without the Strong Arm) just last night, and had the same problem. I …In: Question about mounting 650
17 years ago
Hooah, I did the same thing, but on purpose. I drilled straight down through the top and the 2x6 f …In: Question about mounting 650
17 years ago
I have a new Dillon 650 mounted on the 650 only strong mount part 22052. I built a new bench to moun …In: Question about mounting 650
17 years ago
Eric Cartman had the perfect catch-phrase for this on the new South Park.In: obama going after reloaders
17 years ago
on http//:www.gunowners.org since I cant copy and paste here for some reason, everyone needs to go …In: obama going after reloaders
17 years ago
Buy a case gauge guys, they are invaluable for setting up your sizing dies. FTW I use the RT1200 R …In: Reloading for AR-15
15 years ago
Great post. I'm about to start loading for and AR-15 and and AR-10. This info should help great …In: Reloading for AR-15
16 years ago
Thanks for the valuable tips going to be reloading for my AR-15 and this information will help.In: Reloading for AR-15
17 years ago
There's another adjustment that many people fail to notice. I primarily loaded for revolvers s …In: Reloading for AR-15
17 years ago
I've never submitted to a forum before, so I may very well get 'shot out the air' by …In: Reloading for AR-15
17 years ago
They're starting to come in... I got a shipment for 20K of small pistol magnum primers a couple …In: primers
17 years ago
yup its here in the manuals section
http://www.dillonhelp.com/manuals/english/Dillon-RL550B-Manua …In: Shell Plate Sizes
17 years ago
Yes there is some literature that is readily available to this question. Go to the top of the dillon …In: Shell Plate Sizes
17 years ago
17 years ago
I was wondering whether or not there is a list of the different shell plate #'s/buttons and wha …In: Shell Plate Sizes
17 years ago
Coltdoc, mine is doing the same thing. I thought mabe my bench had become off level or something. I& …In: CV-2001 Tumbler Not Flowing
17 years ago
How old is your case cleaner? Sounds like the support springs are collapsing a bit. Drop us an e-mai …In: CV-2001 Tumbler Not Flowing
17 years ago
My tumbler has started moving the brass and media differently--instead of flowing from center down a …In: CV-2001 Tumbler Not Flowing
17 years ago
have used your power trimmer in the past for blasting/plinking/varmit ammo, and have never had any p …In: on making match quality ammo
17 years ago
I use a steel pin tumbler with about 5 tablespoons of dish soap and run about 300 cases at a time th …In: Removing Case Lube?
5 years ago
In my experience, the lubrication gets on everything in the case feed system in my 650, and using th …In: Removing Case Lube?
6 years ago